KLsepa.compact class II fuel separator
Separator systems for light fluid liquids class I + II
Separators are needed wherever water is contaminated with oils and other light liquids. Separator systems are classified according to NS (nominal size). When you submit an enquiry for a separator system, we calculate the NS you require based on the EN 858 part 2. Operators of the following facilities must ensure that a suitable, functioning separator is installed: Car washes, workshops, fuel stations, vehicle fleets, hazardous goods stores
Coalescence separator and fuel separator
The KLsepa.compact+ separator systems are coalescence separators of class I. They feature an additional coalescence unit that enables a much higher degree of separation. The KLsepa. compact separator systems are fuel separators of class II. A fuel separator achieves a degree of separation of less than 100 mg residual oil per litre of water. With a coalescence unit, this can be reduced to less than 5 mg/l.
Sizing
| NS [l/s] | Leichtflüssigkeitsspeicher [l] | Sludge [l] | Volume [l] | Length [mm] | Width [mm] | Height [mm] | Weight [kg] | order no. | add to enquiry |
|---|---|---|---|---|---|---|---|---|---|
| 6T | 500 | 1300 | 2210 | 2450 | 1150 | 1695 | 200 | 108108 | |
| 10T | 500 | 1300 | 2210 | 2450 | 1150 | 1695 | 200 | 108110 | |
| 10T | 500 | 2000 | 3330 | 2450 | 1400 | 1950 | 250 | 108112 | |
| 15T | 500 | 2000 | 3330 | 2450 | 1400 | 1950 | 250 | 108114 |
calculated size Request for information
